honeylab's blog

各種ハードウェアの改造、主にファミコンミニなどをやってます(ました)

SHARP 太陽光発電 エネルギーモニタ JH-RWL7を分解する

去年の夏に取り付けた太陽光発電システムのエネルギーモニタ端末です。
タッチパネル方式。

 


ネットワーク周りやUIの様子から組み込みLinuxが入ってたりしないかなとの思いの検証です。

f:id:honeylab:20180203120323p:plain

一応組み込みWebサーバから画像での運転状態取得はできるのですが、
それより細かい状況を外から見えないかな、と思って調べてみます。

無線LANで家庭内ルータにつなぐことができます。
なぜかftpサーバもたっているようなのでアクセスしてみますが、ユーザ名とパスワードがわかりませんね。

f:id:honeylab:20180203120423p:plain

f:id:honeylab:20180203120624p:plain

 

早速分解してみます。本体内部。

Ethernetコネクタ、電源・外部IO(多分mobus)、ROM or RAM、CPUが見えます。

f:id:honeylab:20180203111532j:plain

本体基板と無線LANモジュールはフラットケーブルで接続されています。

f:id:honeylab:20180203111622j:plain

モジュール形式はVRL4149-0101Fと読めます。

検索すると

f:id:honeylab:20180203121052p:plain

SMK株式会社というのが出てきますね。

MACがA0:CC:2BでMurata Manufacturing Co., Ltd.と出るので
てっきり村田だと思ったんですが。

 しかし、当メーカページには製品情報が掲載されていないようです。
OEM、組み込み専用モジュールのようですね。

CPUはMCIMX257Dと書かれています。ARM系、ということで期待ができます。

シリアル通信はこの写真の真ん中編のピンかな。
もしかするとここはJTAGで、UARTは別かもしれませんが。

f:id:honeylab:20180203111729j:plain

電源を投入するとしばらくこの画面が表示されています。
このあいだに何か出てないか、次回以降検証していきます。

f:id:honeylab:20180203111937j:plain

Multitap hardware and all developments has stopped.

Sorry for late announce,but it has been stopped.


Because software modding for USB HOST mode will support USB-HUB and support more controllers,mouses and other devices.

Special hardware are no more needes.
You can use USB-HUB and your USB joypad.

 

There are USB-HOST mod for SNESC/NESC.

SNES Classic modifications

You can get information from reddit.

 

And I am spending more time for my family.

All of my developments will be go slowly.

My reserch room and desk have been removed for my son and cats.
 

All of your voices encouraged me. Thank you.

And , New Funny hardware will wake me up.

but If you have any question , email me "hiromitu2120" at "gmail.com"

or twitter @bakueikozo.


---------------------------------
お知らせが遅くなって申し訳ありませんが、マルチタップの開発は停止しました。
すでにUSB-HOST化改造の手段が確立され、
市販のUSBハブと既存のUSBジョイパッドやマウス、
そのほかの組み合わせによって置き換えることが可能です。

必要な情報はredditにあります。

応援ありがとうございました。
honylabの次回作にご期待ください。

---------------------------------

I had used money over than my pocket.
I have some room in my warret.
私はすでに自分の小遣い以上の費用を使ってしまい、
財布には若干の余裕がゴザイマス。

 

Please donate me if you had a fun.
Past of me will receive them.


with MONACOIN

 MRwHn5ipf7m6PRgBzbhTsWfxU9oLLh6CV

-----------------

with Bitcoin

 17LWhhnmYA7kM41NhhReS5WTFBNnNwUd8p
QRコード

-----------------
Amazon wishlist :

Amazon.co.jp

 

Current working..

desiging pcb..

Select case..

f:id:honeylab:20171107091552p:plain

 

jp.misumi-ec.com

 

Using xxxduino as uProcessor , It makes firmware update easily.

f:id:honeylab:20171107091737p:plain

 

Current cost calucrated..

board 1000 yen
uP 1200 yen
wii con 5p 1600 yen
case 600 yen
other parts will 1000 yen

 = 5000 yen (45$ on today) without my working cost...

 

Can you pay this cost only for multitap ??
SNES mini is 8000 yen ?

(新作)スーファミミニ用マルチタップできた

前回のボンバーマンマルチタップ活用型コントローラがいまいち受けが悪かったので、

honeylab.hatenablog.jp


要望もいくつかあった現代的なマルチタップを実現してみました。

I have succeeded to work multitap working with Arduino and connectors without Old Multitap.

 

f:id:honeylab:20171104103631j:plain

構成としてはこんな感じ。

f:id:honeylab:20171104095102p:plain

2ndPadの信号(i2c)の配線に乗っかって3rd以降のリクエストを本体から出し、
それに従ってArduinoがコントローラ信号を返す形です。
Arduino receive and send i2c signal splitted from 2nd pad connector.


Arudinoと3rd-5thのパッドの間はi2cで、i2cがそんなにいっぱいあるマイコンなんか無いよ、と困っていたのですが、SoftwareI2Cを使うことでどうにかなりました。

Arduino and 3rd-5th Pad are communitate with SortwareI2C


このタイプだと、普通のArduino

https://www.amazon.co.jp/dp/B06XFR63YR/

この程度の延長ケーブルがあればとりあえず動作させることができます。
ドライバとファームにまだちょっと不安があるので、その辺が出来たら
誰でも作れるように情報をまとめておこうと思います。

 

You can this NEW Multitap are made with one Arduino and some cables.
I will open resouces when drivers and firmware will stable.

Why I use HUDSON's multitap

This contens are wrong.

I will make wii-type splitter with arduino.

 

Some people ask me , why you have not make Wii-connector-type multitap ?

This is schematic of wii-connector type multitap for NES/SNESC but I have not make.

f:id:honeylab:20171102090551p:plain

f:id:honeylab:20171102090956p:plain

Core parts is LTC4316

www.linear.com

It make convert i2c communication device address without microprocessor.

but this project have some problem.

  • I must make pcb for wii connector mounting.
  • It is little difficult to buy core parts LTC4316
  • and LTC4316 is too small to hand soldering for average people.

    f:id:honeylab:20171102092603p:plain

    f:id:honeylab:20171102092720p:plain
    package is 3mm x 3mm in above picture

If I will make this product in machine production,I select this type.
But I am retro-parts-geek and no money for production , I have used Multitap.

HUDSON's Multitap have connectors already mounted and cased and I can buy oldtype SNES pad in HARD-OFF 100 YEN.